Updates:

9/23/08
Engine is a 281 cid iron block.
Stock heads
Ford GT super car cams, intake, timing chains, followers, and lifters
Stock forged cobra crank with billet rods and forged pistons
Engine is capable of withstanding 950-1000 hp
I use an F1 procharger set up with 20 pounds of boost
Marco Abruzzi TH400 tranny with a built 8.8 rear end
All Baseline Suspensions stuff hooking it to the body.
Hoosier QTP 12.5 x 28
Struts: Koni
Best 60' times were 1.32 with a 9.86 @ 141 best e.t. as of last night.

My partner Terry is racing the car this weekend as I'm on vacation to Myrtle Beach.

Craig

1/17/08
Kevin,
This is Craig Svader from Street Lethal Performance (my partner Terry and you have spoke also). I have the 04 Mach1 with your anti roll bar and control arms. I just wanted to let you know, first time out I got a 1.34 60' time with no noticeable spinning. So, seems like ya never here anything good from a customer only the bad these days BUT! I am writing you to tell you THANK YOU for making a great suspension that hooks GREAT! We had some issues with the anti roll bar but you and my partner Terry got that ironed out on mine and the 03 mach we had at the shop and all is well.
Here it is at work http://videos.streetfire.net/video/ec4bb120-07fe-437b-8021-99ec0129c6e1.htm.
I will be racing select races at the NMRA and Fun Ford circuit this year so wish me luck!

BTW the car is a tilt,cruise air totally street car and the suspension seems fine with about 2000 miles in 2 months on the car. She's running 10.0's on pump gas and mid 9's on race. Have a good one!

Craig Svader