For Inquiries Email:

Kevin Slaby
tech@baselinesuspensions.com

Shipping Note:
Kits are usually shipped the day AFTER the order is received.

Below are pics of the NEW
ProLaunch Gold
upper control arm kit that is made
as a complete Bolt-In to fit all G-Body cars:

G-Body Kits are available for:

Grand National 10-bolt rearend
G-body with A-body 12-bolt rearend
*G-Body with Ford Mustang 8.8 rearend

*As seen in the November/December 2010 issue
of Performance Plus magazine.

 

Shown in a 1987 Buick Grand National

Shown in 1987 Buick Grand National

Correct the INSTANT CENTER position!!
This BOLT-IN Suspension Kits contains everything to swap in:
Grand National 10-bolt rearend
G-body with A-body 12-bolt rearend
G-Body with Ford Mustang 8.8 rearend

These kits not only makes these swaps easy it also
Corrects the Instant Center position and gives you desired
control arm geometry for Drag Racing!
*Some drilling will be necessary.


~STREET / STRIP~



Buick GN
Rear End Kit

Street-Launch Gold
G-BODY with GRAND NATIONAL 10-Bolt Rearend
- This kit uses the popular G-Body Bucket Kit but uses control arms with a Polyeurathane bushing.
For '78 thru '88 G-Body cars with stock rearend.
Not for use in G-Body cars equipped with a Mustang 8.8 rearend.
Polyeurathane Bushings
1" dia Chromemoly control arms, 3/16" thick Torque Box Buckets and all hardware.


~$330.00~

~RACE~


12-Bolt
Rear End
UCA
Swap Kit

Pro-Launch Gold
12-BOLT / G-BODY Rearend SWAP
- This kit will handle cars running well into the 7's.
For '78 thru '88 G-Body cars equipped with a GM 12-Bolt rearend.
1/2"x5/8" Chromemoly Heim ends
1" dia Chromemoly control arms, 3/16" thick Torque Box Buckets and all hardware.


~$320.00~


Walt Judy



Mustang 8.8
Rear End
UCA
Swap Kit

Pro-Launch Gold
G-BODY with MUSTANG 8.8 Rearend SWAP
- This kit will handle cars running well into the 7's.
For '78 thru '88 G-Body cars equipped with a Mustang 8.8 rearend.
1/2"x5/8" Chromemoly Heim ends
1" dia Chromemoly control arms, 3/16" thick Torque Box Buckets and all hardware.

*Note: This kit REQUIRES the use of spherical bearings in the axle housing ears. Not supplied.


~$320.00~


Chad Boise



Mustang 8.8
Rear End
UCA / LCA
Swap Kit

Pro-Launch Gold
G-BODY with MUSTANG 8.8 Rearend SWAP
Upper & Lower control arm kit


*Note: This kit REQUIRES the use of spherical bearings in the axle housing ears. Not supplied.


~$500.00~


Trent Thompson



Buick GN
Rear End Kit

Pro-Launch Gold
G-BODY with GRAND NATIONAL 10-Bolt Rearend
This kit will handle cars running well into the 7's.
For '78 thru '88 G-Body cars equipped with a Grand National 10-Bolt rearend.
1/2"x5/8" Chromemoly Heim ends
1" dia Chromemoly control arms, 3/16" thick Torque Box Buckets and all hardware.


~$320.00~


G-Body
UCA / LCA Kit

Pro-Launch Gold
G-BODY Upper & Lower control arm kit



~$500.00~

Robert Slusser


12-Bolt/G-Body
UCA / LCA Kit

Pro-Launch Gold
G-BODY/12-BOLT Upper & Lower control arm kit



~$500.00~
G-BODY LOWER CONTROL ARMS


(Pic click)

Chromemoly Lower Control Arms
TIG welded Chromemoly
Double Adjustable
1/2"x5/8" Chromemoly Heim ends
Does NOT use sway bar


~$228.00~
**Optional 5/8" bolts available upon request.


12-Bolt/G-Body
UCA / LCA Kit

Pro-Launch Gold  Bucket Upper Control Arms
These are the UCA's designed SPECIFICALLY  for use with my Bucket kits.

Note: Specify Which Rearend you are using as not all UCA's are designed the same.

*Comes standard with 1/2" chassis Bolts and 12mm axle housing bolts and bushings.
*Chromemoly threaded adjusters.
*1/4" think mandrel formed plate w/ 3/4" threaded stud.
*All Zinc plated.

~$210.00~

PACKAGE DEAL PRICING
EXTRA's You asked for


(Pic click)

Body Decals
These are done in a Dark Silver outline that shows the cars body color through the letters. Two different sizes available.

Small: 19" long x 4" tall
Large: 26" long x 5.5" tall


~$30.00 pair ~
Your choice of size includes TWO decals (add note in Coments Box when ordering)

G-Body Chassis Buckets
-Buckets are designed to bolt into the G-Body Frame after drilling one hole. They may also be welded if applicable.
-Will NOT work with any other control arm except those designed specifically for these buckets by Baseline Suspensions, Inc.
-Not designed to fit into any other frame.
-Nothing else is included except these two buckets.
-You supply all hardware, bushings, control arms, etc.
-Baseline Suspensions, Inc will NOT provide any specifications on control arm design or bushing lengths.

*Once these are shipped they are NON-Refundable. No Exceptions.


~$120.00~ *NO Refunds for ANY reason.

Antiroll Bar Bronze Bushing Kit
Need a Christmas Idea?
Want to train your goldfish to jump through hoops?
OR build your own Antiroll Bar with these bolt-in bushings.
Hardware NOT included.


~$33.00~

Rodends and spacers for GM LCA's
Hardware for GM LCA's.

~$30.00~

Don't see something you need? Submit your ideas and let me know!
Thank You
Kevin Slaby


Home Page

For Inquiries Email:

Kevin Slaby
tech@baselinesuspensions.com

 

Policies
Copyright 2002 Baseline Suspensions, Inc. all rights reserved.
No part of this site may be reproduced without prior written consent.
Prices Subject to change without notice.
Note: Actual parts received may vary from pictures on website.