For Inquiries Send
Email To:


Kevin Slaby
tech@baselinesuspensions.com


For Street Cars running 13's and into the 10s.
Choose from
6 different IC positions!
This Street Outlaw upper control arm kit uses the Removable Instant Center Plates of the full out RACE OutLaw kit but uses quieter POLY Bushings on the chassis side of the control arms. This is the only upper control arm kit you will need!

The Street OutLaw - This Fully Adjustable kit comes with REMOVABLE Instant Center Plates so you can dial in the Instant Center position that works best for your car!
Use the Baseline Suspensions
OutLaw Instant Center Calculator to plot out all the Instant Center postions that each plate offers and choose which settings you want to use:

~OutLaw IC Calculator~

~If you want more "HIT" to the tires to really plant the tires
then Raise the rear UCA bolt to increase Anti-Squat.

~If you want less "HIT" on the tires and a longer and lower Instant Center
then Lower the rear UCA bolt to decrease Anti-squat.


For best results and to get the suspension set up correctly for Drag Racing it is recommend that there is some way to alter the ride height of the rear of the car. Adjusting the rear ride
height alters the rear control arm geometry thus moving the Instant Center (IC).
Lengthening the IC changes the amount of leverage the suspension has to lift the
nose of the car and it changes the amount of tire loading during the launches.
Some ways that can be done to adjust the ride height are the use of coilovers, coilover conversion, weight jacker type LCA's, cutting springs or adding weight.
Doing this is not necessary but it's recommended for best results.



Outlaw UCA kit


Outlaw UCA kit


Outlaw UCA kit


Outlaw UCA kit




Copyright 2002 Baseline Suspensions, Inc. all rights reserved.
No part of this site may be reproduced without prior written consent.
Prices Subject to change without notice.